Find best value and selection for your IOMEGA Stor Center IX2 Network Storage Model NHDD2M USED search on eBay. Iomega StorCenter ix4-200d NAS Server - No Hard. Review: Iomega StorCenter Network Storage Drive. I saw an option to install a backup software package. Iomega StorCenter Pro NAS 200d/320 GB with REV.

Accessing the Firmware Provided the serial converter is installed and working correctly you should be able to connect to the firmware's serial console. Iomega is using, the Universal Boot Loader. Now you can connect with any terminal program to the StorCenter's serial console. The easiest approach may be to use NetBSD's tip(1) command to make a direct console connection at 115200bps. # tip -115200 console Note that when using a serial connection via USB you may have to make an entry for /dev/ttyU0 in /etc/remote.

Immediately after switching your StorCenter on it will display the following information (output is from a Single Drive model) and gives you one second to stop autobooting. U-Boot 1.0.0 (Sep 2 2005 - 14:49:11) CPU: MPC8241 Revision 1.4 at 199.999 MHz: 16 kB I-Cache 16 kB D-Cache Board: StorCenter PICR1 is now 00141b98 PICR2 is now 00040605 AMBOR is now c1 DRAM: 64 MB FLASH: 8 MB In: serial Out: serial Err: serial Net: PCI device RTL8169#0: unknown chip version, assuming RTL-8169 PCI device: TxConfig = 0x0 RTL8169#0 Hit any key to stop autoboot: 0. • loadb to load a binary file via serial line in kermit mode • tftpboot to load a binary file over the network with TFTP protocol • start it from the flash memory The last option is prefered once the installation is completed, but obviously it is not possible for the first time boot. Fortunately U-Boot has set up the network interface, which we can use after configuring the ipaddr and serverip environment variables: IOMEGA=>setenv ipaddr 192.168.0.105 IOMEGA=>setenv serverip 192.168.0.5 IOMEGA=>saveenv Saving Environment to Flash. Un-Protected 1 sectors Erasing Flash.. Done Erased 1 sectors Writing to Flash.

Done Protected 1 sectors Once you have set up TFTP and DHCP () you can download altboot like this: IOMEGA=>tftp 1000000 altboot.bin TFTP from server 192.168.0.5; our IP address is 192.168.0.105 Filename 'altboot.bin'. Load address: 0x1000000 Loading: ############### done Bytes transferred = 74732 (123ec hex). Post installation steps After a successful installation you want to make the system boot standalone when switched on, without the need for a serial console. So you have to modify the bootcmd in U-Boot's environment and write the altboot.bin binary to the Flash ROM.

To find a suitable place in the Flash ROM you can use the flinfo command and look out for empty sectors (E). On my StorCenter I have chosen 0xffe80000. Replace that in all the following commands if you have chosen a different address.

Load altboot.bin into memory at 0x1000000 again, as explained above. Then execute the following commands to write it to Flash ROM: IOMEGA=>protect off ffe80000 ffe9ffff Un-Protected 2 sectors IOMEGA=>erase ffe80000 ffe9ffff. Done Erased 2 sectors IOMEGA=>cp.b 1000000 ffe0 Copy to Flash. Done IOMEGA=>protect on ffe80000 ffe9ffff Protected 2 sectors Finally adapt the bootcmd environment string to autoboot altboot and start the netbsd kernel (which is the default name) from wd0 on each reboot: IOMEGA=>setenv bootcmd cp.b ffe000 18000; go 1000000 wd0: IOMEGA=>saveenv Saving Environment to Flash.

Un-Protected 1 sectors Erasing Flash.. Sniper Elite V2 Demo Pc. Done Erased 1 sectors Writing to Flash. Done Protected 1 sectors The is important for setenv not to misinterpret the; as the end of the command. Have fun with your mini NetBSD server!

File size: 2260 Kb Version: 5.3 Date added: 24 Apr 2012 Price: Free Operating systems: Windows XP/Vista/7/8/10 MacOS Downloads: 4337 Dec 27, 2010 hello,i have a 500gb nas iomega and want to know what the default username and password is?can anyone help please? I cannot login to the nas server.